WALL AND ROOF PANELS: Goosewing Grey BS 4800 (10.A.05), DOOR PANEL: Merlin Grey BS 4800 (18.B.25), Poppy Red BS 4800 (04.E.53), Heritage Green RAL 6002, Solent Blue BS 4800 (18.E.53)

LOCKER: Comprising of stainless steel components, Armortec® coated steel plinth and hot-dipped galvanized steel panels with an embossed plastic coating. All door, roof and outer wall panels are reinforced to provide impact resistance.
DOOR: Single door leaf and lift-up access panel (for easy manoeuvring of bicycle) are outward opening only and fitted with continuous hinges. The single door leaf has a flush-fitting lock assembly with a folding handle and impact buffer. Locks can be suited upon request.
VENTILATION: Provided by a fixed ventilator positioned at low level in both the door leaf and the rear panel.
BICYCLE GUIDE RAIL: A centrally-positioned Armortec coated steel channel section at floor level along the full length of the locker.  As an additional security measure, holes are provided at the door end of the bicycle guide rail to allow the user to fasten the wheel with their own locking device.

The steel external skin conforms to BS 476 Part 7 Class 1

The approximate weight of each single locker is 98kg.

Bikeminder lockers are delivered as fully assembled single units. Bolting together into their respective model configuration and base fixing is normally undertaken by our customers.

The minimum base size for each model illustrated should be 50mm greater than the overall length and width shown.  Assuming no suitable existing surface, the base is to be a minimum of 125mm concrete on to hardcore.  The base should be flat, level and square and preferably be raised slightly above the surrounding ground level.  Base fixing is accomplished using the expansion anchor bolts supplied. 10mm holes are to be drilled in the concrete base through pre-drilled holes in the locker plinth to a minumum depth of 90mm.

Usually within 4-6 weeks of order.